The Wavlink AX1800 setup range extender is a top-notch networking device. It is designed to offer blazing internet connectivity for your house. With the help of this extender, you stream on two different bands simultaneously. If you experience low WiFi connectivity and you want to enhance the existing network range then go through this post. In this article, we will discuss a step-by-step guide to installing the Wavlink AX1800 range extender.
Methods to Perform Wavlink AX1800 Setup
There are three ways to configure the Wavlink AX1800 extender. Depending on your preference, you can choose any of these methods.
Setup through WPS Button
The very first way to install the Wavlink wireless range extender using the WPS button. If you are not sure how to set up through this method then follow the steps given below:
- Insert the AX1800 range extender into an active wall outlet.
- Thereafter, turn on the switch.
- Now, look for the WPS button on your WiFi extender.
- Once you find it, hold the WPS button.
- You should do the same thing with the router i.e. identify and press the WPS button.
- Wait for a couple of seconds till the LED light gets stabilized.
Congratulation! In this way, you can configure the Wavlink AX 1800 setup range extender in a hassle-free way.
Setup through Aerial Access Point
Apart from this method, you can also set up your Wavlink wireless range extender using the Aerial Access Point.
- Power on your Wavlink AX1800 range extender by inserting it into the well-maintained electrical outlet. Make sure that it is located near your host router.
- As soon as you have done this, turn on your smart device and open an internet browser.
- Subsequently, connect the laptop to the extender’s network.
- Next, move the cursor to the address field of the browser.
- Here, input the default web address i.e. wifi.wavlink.com.
- After that, fill in the default admin values.
- Click on the Log In button.
- The Wavlink AX1800 range extender web interface will display.
- Now, select the time zone and create the system password.
- Click on the Access Point or LAN Bridge to create a new network.
- Eventually, click on the “Apply” option.
Setup through Manual Method
One more way to install the Wavlink Ax1800 extender is the web GUI method. If you are not sure how to perform an extender setup using this method then go through the instructions discussed in the exact order:
- Turn on Your Extender
Firstly, plug the Ax1800 range extender into a well-working power socket and switch on the button. Hold on for a little while until the LED lights get stabilized.
- Connect Router to Extender
Now, take a quality Ethernet cable and connect the wireless devices. For this, attach one end of the cable to the AX1800 WiFi extender and the other end to the home router. Make certain that the power cable connection is not loose. Changing the existing Ethernet cable with a new one is recommended if the cable is defective.
- Pull on the Web Browser
Once a secure connection is made between the networking devices, power on your client device. You can select any browser that you most frequently use. But verify that the browser you pick is updated to its newest version.
- Access Wavlink Page
As soon as you open a web browser, move the cursor to the address bar. Here, write the default web or IP address to access the Wavlink AX1800 range extender admin page.
- Input Admin Credential
The moment you press the Enter key, the AX1800 range extender login window will come into view. Here, fill in the default username or password. Just in case, you don’t remember the default values then take the assistance of the user manual.
Once done, click on the Log In button. Within a few seconds, the Wavlink Ax1800 range extender dashboard will display. Follow the on-screen guidelines and complete the configuration process.
In the End
That’s it! Our assistance with the Wavlink AX1800 extender setup is now finished. We expect that by using the aforementioned tips you can easily install your wireless range extender in a trouble-free way.